Through the Eyes of an Auditor

Duration: 60 Minutes
flat 40% off on this webinar use promo code
Internal and external audits are an integral part of running a medical device or biotechnology manufacturing operation. To be sure, auditors must follow standards such as ISO 13485, ISO 14971, or regulations such as 21 CFR Part 820. Additionally, an auditor has personal experiences of what a state of control looks like and has visited sufficient places to know what to look for.
Internal and External Audits
Instructor: Jose Ignacio Mora
Product ID: 502991
Anyone in a medical device setting must be prepared for an audit at any and all times. This webinar provides insight into the kinds of clues an auditor might use in determining what areas to focus on. It isn't intended to cover all regulations and standards. What it does cover is the general mental checklist that will influence how well an audit goes, as well as the culture and environment a company's management must encourage so that impression is a good to excellent one.

Objectives of the Presentation
  • What the auditor is looking for and why
  • The first five minutes
  • Touring the plant and manufacturing area
  • Entering and touring the warehouse
  • Entering and touring a clean room
  • Entering and touring lab areas
  • Reviewing documents
  • Reviewing the quality system
Why Should you Attend
  • An experienced auditor does not need to dig very far - he or she already has a mental checklist. You need to know what that is
  • The importance of housekeeping, proper maintenance, orderliness, and following safety rules
  • The importance of visual indicators and following them
  • Utility rooms and custodial closets are often places to hide clutter. Some experienced auditors know that this tells them more about your systems than the clean and presentable areas
  • How using the same logic as the auditors can help you be in a state of constant readiness
Areas Covered
  • An external auditor is coming to your plant. Their first impression may have a major impact on your plant's future as well as your own career. How will your plant look to that auditor?
  • Before they even set foot in the door - what your grounds and outside facility says about your operation?
  • Approaching the production area – tell tale signs that will influence the auditor's perception
  • Your clean room gowning area - how the audit could be almost over before it has even started
  • It's only a utility room - why would they want to look in there?
  • Your janitor's closet - it might as well be your front porch
  • Do you follow your own rules? The auditor is noticing this very carefully and taking notes
  • "Can you put your hands on it?" Documents, procedures, manuals, and reports - why five minutes may be too long to change a first impression
  • Process and environmental control - quick impressions
Who will Benefit
Managers, Supervisors, Directors, and Vice-Presidents in the areas of:
  • Research & Development
  • Quality Engineers and Auditors
  • Manufacturing Engineers
  • Regulatory Affairs Teams
  • Quality Assurance & Quality Control Teams
  • Operations Teams
  • Document Control
  • Design Assurance Teams
  • Device Development Teams
  • Personnel involved in Verification and Validation planning, execution and documentation for devices
$375
Recorded Session for one participant
Get life time access with download option!
Book this course
Pay Now
  $500.00 Training CD
Free shipment within 4 Working Days of placing the order. Get life time access for unlimited participants.
  $600.00 Training USB Flash Drive
Free shipment within 4 Working Days of placing the order. Get life time access for unlimited participants.
For multiple location please contact our customer care team +1-510-857-5896.
How it works
Live Session - How it works
  • Login to onlinecompliancepanel with your registered username and password https://www.onlinecompliancepanel.com/login
  • The webinar joining link, username and password for joining the webinar will be updated on your OCP Account 24 hours prior to the webinar
  • Presentation handouts in Downloadable PDF format will be updated on your OCP Account 24 hours prior to the live session
  • Login to the audio conference on the scheduled date and time
  • Get answers to your queries through interactive Q&A sessions via chat at the end of the session
  • Download the Certificate of Attendance and Purchase Invoice from your OCP Account 24 hours after the completion of the session
  • Please let us know your thoughts and views at the end of the webinar, your valuable feedback will help us improve
Recorded Session - How it works
  • Login to onlinecompliancepanel with your registered username and password https://www.onlinecompliancepanel.com/login
  • Upon purchase of the recorded session a link will be updated on your OCP Account within 24 hours
  • Please click on the link to access the Recorded Session
  • Presentation handouts in downloadable PDF format will be updated on your OCP Account within 24 hours of the purchase of the product
  • Download the Certificate of Attendance and Purchase Invoice from your OCP Account after 48 hours of the product Purchase
  • Please share your valuable Feedback at the end of the session
Instructor Profile:
Jose Mora is a Principal Consultant specializing in Manufacturing Engineering and Quality Systems. For over 30 years he has worked in the medical device and life sciences industry specializing in manufacturing, process development, tooling, and quality systems. Prior to working full time as a consulting partner for Atzari Consulting, José served as Director of Manufacturing Engineering at Boston Scientific and as Quality Systems Manager at Stryker Orthopedics, where he introduced process performance, problem solving, and quality system methodologies.

During that time he prepared a white paper on the application of lean manufacturing methods to the creation and management of controlled documents and a template for strategic deployment. Jose led the launch of manufacturing at a start-up urology products company as Director of Manufacturing for UroSurge, Inc. at the University of Iowa's business incubator park in Coralville, IA, creating a world-class medical device manufacturing operation, with JIT, kanban systems, visual workplace and lean manufacturing practices. José worked for 10 years at Cordis Corporation, now a Cardinal Health company, where he led the successful tooling, process development and qualification of Cordis' first PTA (percutaneous transluminal angioplasty) catheter. His medical device experience includes surgical instruments, PTA & PTCA dilatation and guiding catheters, plastic surgery implants and tissue expanders, urology implants and devices for the treatment of incontinence, delivery systems for brachytherapy, orthopaedic implants and instruments, and vascular surgery grafts and textiles.

During his time at Cordis, Jose managed the Maintenance and Facilities Department, taking that operation to a level rated as "tops" by the UK Department of Health and Social Services (DHSS) during one of their intensive audits. Jose managed Manufacturing Engineering as part of the Guiding Catheter Core Team of managers, a team that took the Cordis Guiding Catheter business to lead the market, bringing it up from fourth place. By introducing world-class techniques, the Guiding Catheter design and manufacturing was completely re-engineered for robust design and tooling, under Jose's leadership. He was also instrumental and played a leadership role in the complete re-engineering of the Tooling Control System, including design drafting, the tool shop and technical support. Wherever he has worked, he has a track record of introducing world-class methodologies such as Kepner-Tregoe, Taguchi techniques, Theory of Constraints, Lean Manufacturing, Five S (Visual Workplace), process validation to Global Harmonization Task Force standards, and similar approaches.
View More